Customer Service Hours: M-F 8am-5pm EST
Same Day Shipping For Same Day Shipping Order in the Next:
Live Help:Call now 833-392-0114
StockpileExpress logo
Master Distributor for Heating, HVAC/R, and Water Heating Needs
StockpileExpress logo
Get Wholesale Pricing!

Field Controls 46395401

Field Controls 46395401Power Venter 4 Inch Stainless Steel 115 Volt 1.7 Amp 138 Watt for Gas Or Oil Furnaces Boilers Water Heaters SWG4HDS

Sign In for price In Stock

QUANTITY

+

trackSame Day Shipping on orders placed by 4pm EST

Product Overview


Gas and oil heating appliances generate heat through the combustion of fuel. The heat is transferred through the heat exchanger and distributed to the conditioned space. The products of combustion, however, must be vented safely out of the structure. In a conventional chimney, venting is achieved by the natural lifting action of the hot combustion gas. New, efficient systems absorb more of the heat in the heat exchanger and produce lower temperature vent gas. Lower temperature gas does not rise as quickly or as reliably as in older, less efficient systems. Power venting or sidewall venting is more economical and safer than chimney venting. A power venter uses a motorized blower to vent the products of combustion. A power venter is interlocked with the appliance to ensure that proper draft is achieved before the appliance burner is activated.

  • The SWG or ComboVent power venter is the safest, most efficient power venter available today
  • Patented SWG or ComboVent power venters are ETL and cETL listed for all LP gas, natural gas or oil-fired heating equipment
  • The SWG or ComboVent combines the motor, blower and vent hood in one complete, easy to install unit
  • The SWG mounts on the outside of the building and pulls the combustion gases from the appliance through the outside wall utilizing 100% negative pressure
  • 100% negative pressure in the vent pipe for maximum safety
  • Standard galvanized pipe can be used instead of expensive stainless steel
  • No need to seal vent pipe joints, saving time and money
  • Significantly longer vent lengths than positive pressure, direct vent systems
  • The SWG or ComboVent is recommended by major heating appliance manufacturers
  • The SWG or ComboVent must be sized to match the appliance or appliances input firing rate
  • Most firing rates are published in the manufacturer's installation manual
  • The SWG and ComboVent must be installed with a CK control kit to ensure proper listing and safe, efficient venting
  • Thermal protection
  • 1.1 gph maximum oil at 100 psi
  • 0.9 gph maximum oil at 140 psi
  • 35 Btu/hr at maximum equivalent feet of vent pipe
  • 100 Btu/hr at 60% of maximum equivalent feet of vent pipe
  • 60 Hz frequency
  • 170000 Btu/hr gas input

Product Details

BrandField Controls
Size4IN
MaterialStainless Steel
Voltage115V
Amperage1.7AMP
Wattage138W
ApplicationGas Or Oil Furnaces Boilers Water Heaters
Part NumberSWG4HDS

back to top